How to Fit Tail Light of Maruti Suzuki Swift VDI 2011 – Car Parts India

How to Fit Tail Light of Maruti Suzuki Swift VDI 2011 – Car Parts India

How to Fit Tail Light of Maruti Suzuki Swift VDI 2011 – Car Parts India. Motrpart.in brings in for the first time in India a highly useful Do it Yourself video to change the tail lights of Maruti Suzuki Swift VDI 2011 make cars. A word of caution before you proceed to change any parts the ignition your car should always be switched off. The process really starts with opening of the back cover of the Maruti Suzuki Swift VDI 2011. Back cover opened spot the plastic moulded taillight assembly. On your right, you will spot two screws one at the top and the other at the bottom. The dimension of the Screws are of 10 Number (10 no). Have a good Bit Set (Chabi) ready by your side. Using 10 number Chabi open the screws by twisting clockwise. Bring out the moulded plastic cover of the taillight assembly by gentle thuds of your hand. If the cover is stuck on the sides, use a Screw driver. But remember not to damage or scratch the cover. Screws opened take the taillight assembly in your hands. The Taillight assembly of a Maruti Suzuki Swift VDI, 2011make consists of 3 lights. On the upper most part is the bulb for Parking and Brake it is a kind of double point performing two functions. In the middle is the Indicator light. And in the bottom is the Back gear light. The 3 bulbs are fitted in the slot through bulb holders. For replacing the bulb(s ) take them out from the slot by a gentle pull. Once the bulb with the holder is out give a twist as you do normally for replacing bulbs in <b>…</b>


Source: How to Fit Tail Light of Maruti Suzuki Swift VDI 2011 – Car Parts India (Youtube).